Stable crack growth in aluminum tensile specimens

Post's white-light moiré interferometry was used to obtain sequential records of the transientU _y -displacement fields associated with stable crack growth in 7075-T6 and 2024-0, single-edge-notched (SEN) specimens with fatigued cracks. TheU _y -displacement fields are used to evaluate the crack-tip opening displacement (CTOD), far- and near-fieldJ-integral values, Dugdale-strip-yield model, William's polynomial function and the HRR field. Paper was presented at 1985 SEM Spring Converence on Experimental Mechanics held in Las Vegas, NV on June 9–14.     

Interfacial crack problem in layered soft ferromagnetic materials in uniform magnetic field

The magnetoelastic plane strain problem of an interfacial Griffith crack between two dissimilar soft ferromagnetic elastic materials subjected to a uniform magnetostatic field is considered within the framework of linear magnetoelasticity. By making use of the Fourier integral transform technique, the mixed boundary problem is then reduced to a pair of singular integral equations of the second kind. Solutions of the singular integral equations are obtained numerically by means of a Jacobi polynomial expansion method. Effects of the magnetic field, the combinations of the magnetic properties of materials and the geometric parameters on the magnetoelastic stress intensity factors in the vicinity of crack tip are shown graphically.     

Cs蒸气中的碰撞能量合并和6P3/2和6P1/2间的激发转移

通过激发转移和碰撞能量合并研究了Cs(62P)精细结构混合.单模半导体激光器激发基态Cs原子至6P3/2态,直接荧光是由6P3/2态发射的,敏化荧光是由精细结构碰撞转移和碰撞能量合并产生的.由相对荧光强度得到了转移截面σ(6P3/2→6P1/2)=(1.5±0.5)×10-15cm2,与其它实验结果进行了比较.     

Asymmetric membrane formation via immersion precipitation method. I. Kinetic effect

The kinetic effect of the phase inversion process on the membrane morphology is explored, with emphasis on the diffusion coefficient of the nonsolvent as a measure of the solvent/nonsolvent exchange rate. The diffusion coefficient is closely related to the nonsolvent tolerance of the polymer solution, which was estimated from a pseudo-ternary phase diagram of the following system: polymer: polysulfone; solvent system: a mixture of the solvent 1-methyl-2-pyrrolidinone and a solvent additive (formic acid, water or ethanol); and nonsolvent: ethanol. Regardless of the kind of solvent additive employed, when the diffusion coefficient of the nonsolvent is high for a given gelation medium, then the membrane consists of a smooth, defect-free surface and macrovoid-free cross section, and is highly permeable to oxygen. However, using a polymer solution with a low diffusion coefficient results in a membrane of a rather defective morphology. Therefore, it is concluded that the diffusion coefficient of the nonsolvent is a crucial parameter in controlling membrane morphology.     

Simple, Rapid, and Accurate RP-HPLC Method for Determination of Cystine in Human Urine after Derivatization with Dansyl Chloride

An accurate, simple, and sensitive reversed-phase high-performance liquid chromatographic method, with loratadine as internal standard (IS) and UV detection at 286 nm, has been developed for deterination of cystine in human urine. The major innovations of the method include use of acrylonitrile to protect cysteine from oxidization to cystine, separation of cysteine, as the dansyl derivative, from cystine, and use of isocratic elution instead of gradient elution to reduce the time and cost of serial analysis. The mobile phase was 0.05 M sodium acetate–methanol, 35:65 (v/v), adjusted to pH 3.5 with 2.5 M citric acid, at a flow rate of 1.0 mL min^?1. The retention times of cystine and the IS were 16.6 and 19.9 min, respectively. The limit of detection for cystine was 0.3 mg L^?1. Extraction recovery of cystine was >85.6%. Intra-day and inter-day precision (RSD) for cystine were below 4.3 and 8.5%, respectively. There was no chromatographic interference from other α-amino acids present in mammalian proteins, or from other urine components. The calibration plot for the cystine derivative was linear in the range 1–500 mg L^?1 and the correlation coefficient was 0.9992. The method was validated appropriately and successfully used for determination of cystine in human urine.     

A Discrete Effect of the Thermal Lattice BGK Model

In this article, a discrete effect in the thermal Lattice BGK two-speed model is studied. These effects are due to the non-equilibrium state in the particle distribution function, and the non-equilibrium occurs near walls. The mechanism of the LBM counterpart of the thermal creep flow, which appears due to the temperature gradient of the boundary in rarefied gases, is clarified analytically and numerical calculations are performed for some cases. A technique for eliminating this effect is also shown.     

微量元素与脂代谢

铬是人体内必需的微量元素．综述了缺铬对脂代谢的影响、补铬对脂代谢的效应和铬对脂代谢作用的机制．根据动物实验和人群研究调查，阐述了铬与脂代谢有关，且补充铬对胆固醇和某些脂蛋白含量都有良好的作用．指出了铬可能与胰岛素及铬对脂代谢中关键酶的作用密切相关．但是,有关的作用机制仍未充分阐明。有必要进一步研究。     

Impact response of an interface crack in a hybrid piezoelectric laminate

Summary  In a hybrid laminate containing an interfacial crack between piezoelectric and orthotropic layers, the dynamic field intensity factors and energy release rates are obtained for electro-mechanical impact loading. The analysis is performed within the framework of linear piezoelectricity. By using integral transform techniques, the problem is reduced to the solution of a Fredholm integral equation of the second kind, which is obtained from one pair of dual integral equations. Numerical results for the dynamic stress intensity factor show the influence of the geometry and electric field. Received 29 June 2001; accepted for publication 3 December 2001     

Long pulse generation technology of solid-state laser adopting a new real time multi-discharge method

In this study, a solid-state laser system adopting a new real time multi-discharge method in which three flashlamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a program integrated circuit one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and the real-time control is possible with an external keyboard, enabling various pulse shapes. In addition, longer pulses can be more widely used for industrial processing and many medical purposes.     

Comparative Study of Plasma Spray Flow Fields and Particle Behavior Near to Flat Inclined Substrates

Numerical models have been developed using computational fluid dynamics (CFD) analysis program FLUENT V6.02^© to investigate the effect of the substrate on the behavior of the plasma flow fields and in-flight particles. Simulations are performed for cases where flat substrates are either present or absent, for the former, the substrate is oriented perpendicularly or inclined to the torch axis. It is shown that although the presence of perpendicular or inclined substrate significantly influences the plasma flow fields at the vicinity of the substrate, the particle behavior remain relatively unaffected. The insignificant effect of the substrate on particle behavior is qualitatively verified by experimental observation using SprayWatch^© imaging diagnostics equipment. Images captured by the equipment confirm that the particles travel through the plasma plume with high momentum and show no sudden change in theirtrajectories right before impacting the substrate. Both the numerical and experimental findings show that the freestream model is sufficiently detailed for future work of this nature.